STM32F103ZC datasheet(8/118 Pages) STMICROELECTRONICS

8 / 118 page

Introduction

STM32F103xC, STM32F103xD, STM32F103xE

8/118

Introduction

This datasheet provides the ordering information and mechanical device characteristics of

the STM32F103xC, STM32F103xD and STM32F103xE High-density performance line

microcontrollers. For more details on the whole STMicroelectronics STM32F103xx family,

please refer to Section 2.2: Full compatibility throughout the family.

The High-density STM32F103xx datasheet should be read in conjunction with the Medium-

and High-density STM32F10xxx reference manual.

For information on programming, erasing and protection of the internal Flash memory

please refer to the STM32F10xxx Flash programming manual.

The reference and Flash programming manuals are both available from the

STMicroelectronics website www.st.com.

For information on the Cortex™-M3 core please refer to the Cortex™-M3 Technical

Reference Manual, available from the www.arm.com website at the following address:

http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0337e/.

Description

The STM32F103xC, STM32F103xD and STM32F103xE performance line family

incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a

72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and

SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals

connected to two APB buses. All devices offer three 12-bit ADCs, four general purpose 16-

bit timers plus two PWM timer, as well as standard and advanced communication interfaces:

up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103xx High-density performance line family operates in the

−40 to +105 °C

temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving

mode allows the design of low-power applications.

The STM32F103xx High-density performance line family offers devices in 5 different

package types: from 64 pins to 144 pins. Depending on the device chosen, different sets of

peripherals are included, the description below gives an overview of the complete range of

peripherals proposed in this family.

These features make the STM32F103xx High-density performance line microcontroller

family suitable for a wide range of applications:

●

Motor drive and application control

●

Medical and handheld equipment

●

PC peripherals gaming and GPS platforms

●

Industrial applications: PLC, inverters, printers, and scanners

●

Alarm systems, Video intercom, and HVAC

Figure 1 shows the general block diagram of the device family.

STM32F103ZC Scheda tecnica(PDF) 8 Page - STMicroelectronics

STM32F103ZC Scheda tecnica(HTML) 8 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL