M7040N datasheet(27/159 Pages) STMICROELECTRONICS

27 / 159 page

27/159

M7040N

The Read Burst Address Register (RBURREG)

These READ burst address register fields must be

programmed before burst read.

Table 13. Read Burst Register Description

The Write Burst Address Register (WBURREG)

These WRITE burst address register fields must

be programmed before burst write.

Table 14. Write Burst Register Description

The NFA Register

Bit [0] of each 72-bit data entry is a special bit des-

ignated for use in the operation of the LEARN

command. In 72-bit quadrants, the bit[0] indicates

whether a location is full (bit set to '1') or empty (bit

set to '0'). Every WRITE/LEARN command loads

the address of first 72-bit location that contains a

'0' in the entry’s bit[0]. This is stored in the NFA

set to '1,' the M7040N asserts FULO[1:0] to '1.'

In 144-bit-configured quadrants, the LSB of this

set bit '0' and bit 72 in a 144-bit word to either '0' or

'1' to indicate full/empty status.

Note: Both bits (0 and 72) must be set to '0' or '1'

(e.g., '10' or '01' settings are invalid).

Table 15. NFA Register

Field

Range

Initial Value

Description

ADR

[15:0]

Address. This is the starting address of the data array or mask array

during a burst READ operation. It automatically increments by 1 for

each successive read of the data array or mask array. Once the

operation is complete, the contents of this field must be reinitialized

for the next operation.

[18:16]

Reserved.

BLEN

[27:19]

Length of Burst Access. The device is capable of writing from 4 up

to 511 locations in a single burst. The BLEN decrements

automatically. Once the operation is complete, the contents of this

field must be reinitialized for the next operation.

[71:28]

Reserved.

Field

Range

Initial Value

Description

ADR

[15:0]

Address. This is the starting address of the data array or mask array

during a burst WRITE operation. It automatically increments by 1 for

each successive write of the data array or mask array. Once the

operation is complete, the contents of this field must be reinitialized for

the next operation.

[18:16]

Reserved.

BLEN

[27:19]

Length of Burst Access. The device is capable of writing from 4 up

to 511 locations in a single burst. The BLEN decrements

automatically. Once the operation is complete, the contents of this

field must be reinitialized for the next operation.

[71:28]

Reserved.

Address

71 - 16

15 - 0

Reserved

Index

M7040N Scheda tecnica(PDF) 27 Page - STMicroelectronics

M7040N Scheda tecnica(HTML) 27 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL