4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

8.

DO NOT open the case, contains no replaceable parts inside the

product.

9.

If the device malfunctions, please consult your dealer.

10. DO NOT use the device while the vehicle is in motion, the tester is

not suitable for permanent installation in a motor vehicle.

11. Make sure the vehicle is securely parked and the handbrake

applied before using the tester. For vehicles with automatic

transmissions the “park position” must be engaged and the hand

brake must be engaged.

12. DO NOT use other measuring devices when using the tester.

13. Seek professional help if you are unsure about anything related to

the electrical system in your vehicle.

14. When using the crocodile clips for testing, the red clip must be

clamped to the positive pole (+ or Red) of the battery, and the

black clip must be clamped to the negative pole (- or black). DO

NOT reverse the connections.

15. If the outer insulation of the cable is damaged, it may cause a

short circuit. Stop using it immediately and contact your Clarke

dealer.

OTHER INFORMATION

1.

The Battery Tester is suitable for all types of 12V lead acid batteries

(vehicle batteries).

2.

The device is NOT suitable for commercial purposes.

3.

The device is NOT calibrated.