If It’s Critical, It’s L-com

2

USA & Canada

+1 (800) 341-5266 | International +1 (978) 682-6936 | L-com.com

© 2023 Infinite Electronics, Inc. L-com is a registered trademark of Infinite Electronics, Inc.

413 to 423 MHz Rubber Duck Antenna SMA Male

LCANRBD1069

Environmental Specifications

Temperature

Operating Range

-40 to +60 deg C

Storage Range

-40 to +80 deg C

Ingress Protection

IP65

Compliance Certifications (see product page for current document)

Plotted and Other Data

Notes:

Typical Radiation Pattern

Appendix

Electrical Downtilt: Angle in the antenna’s elevation pattern in which the maximum gain occurs.

Gain: Antenna’s average gain.

Front to Back Ratio @ 180°±30°: Average difference between the antenna’s maximum gain and the maximum gain in the antenna’s back

lobe over ±30° angles.

Cross-polarization Ratio (dB): Typical difference between the co-polarization and cross-polarization gain across the sector’s 3 dB Beam

Width.

Dedicated to serving the needs of the Wireless Internet Service Provider (WISP) market, KP Performance Antennas offers purpose built

products that reliably perform in the field. KP Performance Antennas product line consists of Yagi, Grid, Omni, Dish and other style antennas

that operate in the 900 MHz, 2.4 GHz, 3 GHz, and 5 GHz frequencies.

413 to 423 MHz Rubber Duck Antenna SMA Male from L-com has same day shipment for domestic and International orders. Our portfolio includes coaxial

cable assemblies, connectors, adapters and custom products as well as lightning and surge protectors, NEMA rated enclosures, and an RF product line which

includes antennas, amplifiers, passive, and active components.

URL: https://www.l-com.com/413-423-mhz-rubber-duck-antenna-sma-male-lcanrbd1069-p.aspx

The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications

to the part and/or the documentation of the part in order to impliment improvements. L-com reserves the right to make such changes as required. Unless otherwise stated, all

specifications are nominal. L-com does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and L-com does not

assume liability arising out of the use of any part or document.