| Motore di ricerca datesheet componenti elettronici |
|
AS7263 Scheda tecnica(PDF) 15 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
AS7263 Scheda tecnica(HTML) 15 Page - ams-OSRAM AG |
|
15 / 46 page ![]() Page 14 Datasheet, Public Document Feedback [v4-00] 2022-Nov-30 AS7263 − Detailed Description Data Conversion Description AS7263 spectral conversion is implemented via two photodiode banks per device. Bank 1 consists of data from the S, T, U, V photodiodes. Bank 2 consists of data from the R, T, U, W photodiodes. Spectral conversion requires the integration time (IT in ms) set to complete. If both photodiode banks are required to complete the conversion, the 2nd bank requires an additional IT ms. Minimum IT for a single bank conversion is 2.8 ms. If data is required from all 6 photodiodes then the device must perform 2 full conversions (2 x Integration Time). The spectral conversion process is controlled with BANK Mode settings as follows: BANK Mode 0: Data will be available in registers S, T, U & V (R and W registers will be zero). BANK Mode 1: Data will be available in registers R, T, U & W (V and W registers will be zero). BANK Mode 2: Data will be available in registers R, S, T, U, V & W When the bank setting is Mode 0, Mode 1, or Mode 2, the spectral data conversion process operates continuously, with new data available after each IT ms period. In the continuous modes, care should be taken to assure prompt interrupt servicing so that integration values from both banks are all derived from the same spectral conversion cycle. BANK Mode 3: Data will be available in registers R, S, T, U, V & W in One-Shot mode. When the bank setting is Mode 3, the device operates in One-Shot mode. Spectral conversion occurs only when bit 0 of the control register (1SHOT ) is set to 1. The 1SHOT bit in the control register is subsequently cleared by hardware at the same time the DATA_RDY bit is set to 1 indicating the availability of spectral conversion result data. The One-Shot mode is intended for use when it is critical to ensure that spectral conversion results are obtained contemporaneously. |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |