DLS360 datasheet(13/40 Pages) CLARKE

Il numero della parte	DLS360

Spiegazioni elettronici	3600PSI DIESEL POWER WASHER

PDF	40 Pages

Scroll/Zoom	100%

Produttore elettronici	CLARKE [Clarke International]

Homepage	https://www.clarkeinternational.com/

Logo

13 / 40 page

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

THE HIGH PRESSURE HOSE

CONNECT THE HOSE TO THE GUN

1. Slide the connector collar on the

hose backwards.

2. Push the gun into the connector.

3. Release the connector collar.

NOTE: Make sure the connection is

secure.

CONNECT THE HOSE TO THE POWER WASHER

1. Slide the connector collar on the

power washer towards the machine.

2. Push the hose into the connector.

3. Release the connector collar.

NOTE: Make sure the connection is

secure.

CONNECT WATER INLET HOSE

1. Remove the travel cap if fitted.

2. Fit the hose adaptor as shown.

3. Connect the water supply hose to the

hose adaptor.

NOTE: The water source must provide

a minimum of 17 litres per

minute @ 20 PSI.

NOTE: Make sure the water inlet hose

is screwed on tightly.

DLS360 Scheda tecnica(PDF) 13 Page - Clarke International