 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
CC1404P Scheda tecnica(PDF) 16 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
CC1404P Scheda tecnica(HTML) 16 Page - Texas Instruments |
|
|
16 / 44 page  6.17 782MHz - 957MHz Receive (RX) (continued) When measured on the BP-CC1404P-8-FE reference design with Tc = 25°C, VDDS = 3.6V.All measurements are performed at the antenna input with a combined RX and TX path and through an RF switch as part of the reference design. All measurements are performed conducted. All measurements are using 250 byte PSDU < 10% PER unless otherwise noted. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Saturation limit 10% PER, 250 byte payload, 920.1MHz 10 dBm Selectivity, +400kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 47 dB Selectivity, -400kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 42 dB Selectivity, +800kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 54 dB Selectivity, -800kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 50 dB Image rejection (image compensation enabled) 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 40 dB Blocking, +1MHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 56 dB Blocking, -1MHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 56 dB Blocking, +2MHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 61 dB Blocking, -2MHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 60 dB Blocking, +10MHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 65 dB Blocking, -10MHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 75 dB Blocking + 5% Fc. (43.42MHz) 10% PER, 250 byte payload, wanted level -82dBm, CW interferer -17 dBm Blocking - 5% Fc. (-43.42MHz) 10% PER, 250 byte payload, wanted level -82dBm, CW interferer -14 dBm RSSI accuracy Starting from the sensitivity limit across the given dynamic range ±3 dB Frequency error tolerance (ppm) 10% PER, 250 byte payload, measured at 10dB above sensitivity level. Negative offset -75 ppm Frequency error tolerance (ppm) 10% PER, 250 byte payload, measured at 10dB above sensitivity level. Positive offset 75 ppm Symbol rate error tolerance (ppm) 10% PER, 250 byte payload, measured at 10dB above sensitivity level. Negative offset -1000 ppm Symbol rate error tolerance (ppm) 10% PER, 250 byte payload, measured at 10dB above sensitivity level Positive offset 1000 ppm Wi-SUN, 200kbps, ±100kHz deviation, FSK, 271kHz RX BW, #4b Sensitivity 200kbps, ±100kHz deviation, FSK, 922.6MHz, 10% PER, 250 byte payload (w/uLNA) -104 dBm Sensitivity 200ksps (100kbps), ±100kHz deviation, FSK, 922.6MHz, 10% PER, 250 byte payload (w/uLNA), FEC enabled -109 dBm Saturation limit 10% PER, 250 byte payload, 922.6MHz 10 dBm Selectivity, +600kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 49 dB Selectivity, -600kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 42 dB Selectivity, +1200kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 54 dB Selectivity, -1200kHz 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 52 dB Image rejection (image compensation enabled) 10% PER, 250 byte payload, wanted level -82dBm, CW interferer 39 dB Blocking, +1MHz 10% PER, 250 byte payload, wanted level -86dBm, CW interferer 55 dB Blocking, -1MHz 10% PER, 250 byte payload, wanted level -86dBm, CW interferer 37 dB Blocking, +2MHz 10% PER, 250 byte payload, wanted level -86dBm, CW interferer 59 dB Blocking, -2MHz 10% PER, 250 byte payload, wanted level -86dBm, CW interferer 58 dB Blocking, +10MHz 10% PER, 250 byte payload, wanted level -86dBm, CW interferer 64 dB Blocking, -10MHz 10% PER, 250 byte payload, wanted level -86dBm, CW interferer 70 dB Blocking + 5% Fc. (43.42MHz) 10% PER, 250 byte payload, wanted level -86dBm, CW interferer -18 dBm Blocking - 5% Fc. (-43.42MHz) 10% PER, 250 byte payload, wanted level -86dBm, CW interferer -14 dBm RSSI accuracy Starting from the sensitivity limit across the given dynamic range ±3 dB Frequency error tolerance (ppm) 10% PER, 250 byte payload, measured at 10dB above sensitivity level. Negative offset -75 ppm Frequency error tolerance (ppm) 10% PER, 250 byte payload, measured at 10dB above sensitivity level. Positive offset 70 ppm CC1404P SWRS300 – SEPTEMBER 2026 www.ti.com 16 Submit Document Feedback Copyright © 2026 Texas Instruments Incorporated Product Folder Links: CC1404P |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
