3/18

User

’s Guide

BM1P10CFJ-EVK-001

© 2020 ROHM Co., Ltd.

No. 63UG022E Rev.001

2020.08

Operation Procedure

1

Necessary Equipment

(1) AC power supply (90 Vac to 264 Vac, 100 W or more)

(2) Load equipment (5 A at maximum value)

(3) DC voltmeter

(4) Wattmeter

(5) 5V power supply (10 mA)

2

Connect to Each Equipment

(1) Connect a measuring instrument to Figure 3 reference as each power supply OFF.

(2) Set the AC power supply to 90 Vac to 264 Vac, and power supply ON.

(3) In the case of electronic load, load sets it between 0 A to 2A, and power supply ON.

(4) The DC voltmeter of the output connects with directly outputting it, and confirm the voltage.

(5) Connect STBY pin and GND pin to DC power supply. and apply +5V. The output voltage is 24V.

The output voltage becomes 7.5V when it is 0V. Set the input voltage of the STBY pin on less than +-8V.

Figure 3. Diagram of How to Connect

CN1-2 AC (N)

CN1-2 AC (L)

AC Power supply

Load

Power Meter

DC Meter

DC supply