Intelligent LED Solutions, 3 Clerewater Place, Lower Way, Thatcham, Berkshire RG19 3RF UK

Telephone : +44 (0)1635 294606 Fax : +44 (0)1635 869200 Email: info@i-led.co.uk www.i-led.co.uk

A division of Intelligent Group Solutions Ltd

1

3 OSLON®+80 PowerAnna PCB White

ILC-ONA7-XXXX-SC211-WIR200. Series

Product Overview

The all new PowerAnna Coin from ILS has been designed to work with

any Ledil Anna lens whether this be the 40 or 50mm lens. At the heart of

each Anna are 3 OSRAM Opto Semiconductors OSLON® SSL 80. LEDs

which can be driven up to 1000mA while OSRAM’s latest power chip

technology remains efficient even at the highest drive currents. A low

thermal resistance of 7K/W ensures cool running and a highly efficient

product. PowerAnna’s are compact, powerful LED light sources built on

aluminium substrates for optimal thermal management. Available with

200mm wires as standard.

Applications

z

General Lighting

z

Display Lighting

z

Task Lighting

z

Spot Lighting

z

Downlighters

z

Retail and Entertainment Lighting

Technical Features

z

PowerAnna’s contain OSRAM Opto Semi OSLON® SSL 80 LEDs with high efficacy and a narrow beam angle

z

Up to 50,000 Hour lifetime to 70% of original brightness

z

Mounting holes using M3 screws allows easy installation

z

Size (L x W x H): 30x30x4mm

z

PowerAnna’s can be linked together to produce longer chains.

z

Current range 150mA to 1000mA

*This datasheet should be read in conjunction with the relevant OSRAM Opto Semiconductors data on the LED used

Important Information and Precautions

z The PowerAnna’s LEDs, when powered up, is very bright. Thus it is advised that you do not look directly at it. Turn

the PowerAnna away from you and do not shine into the eyes of others.

z Do not operate PowerAnna’s with a Power Supply with unlimited current. Connection to constant voltage Power

Supplies that are not current limited may cause the PowerAnna to consume current above the specified maximum

and cause failure or irreparable damage.

z PowerAnna’s, when operated, can reach high temperatures thus there is risk of injury if they are touched.

z DO NOT HOT PLUG ON LED SIDE OF POWER SUPPLY.

z DO NOT TOUCH or PUSH on the LED as this can cause irreparable damage.