SPECIFIC A TION SHEET

www.panduit.com

specifications

Cable spacer shall be used with approved cable ties at

intervals of not greater than 8 inches (203.2mm) to maintain

separation between wires in order to prevent relative motion

between harnesses in critical applications. The spacer design

shall provide smooth, rounded edges in order to not accelerate

abrasion between itself and a wire bundle. The spacer shall

maintain a distance between parallel wires of greater than 0.5

inch (12.70mm) or alternatively 0.3 inch (7.62mm), and shall

maintain a distance between perpendicular wires at greater

than 0.3 inch (7.62mm). The cable spacer shall weigh less

than 0.75 gram.

Cable Spacer

Cable Spacer

Use with Miniature,

Intermediate, and

Standard cross

section cable ties: CSMS-D71

Related Products

Pan-Ty ® Cable Ties – PEEK Material

Max. bundle diameter

0.87 In. (22mm):

PLT1M-C71

1.38 In. (35mm):

PLT1.5M-C71

1.88 In. (48mm):

PLT2S-C71

Contour-Ty ® Cable Ties –

Heat Stabilized Nylon 6.6 Material

Max. bundle diameter

1.00 In. (25mm):

CBR1M-M30

1.50 In. (38mm):

CBR1.5I-M30

2.00 In. (51mm):

CBR2S-M30

3.00 In. (76mm):

CBR3S-M30

4.00 In. (102mm):

CBR4S-M30

technical information

Material:

Polyetheretherketone (PEEK)

Flammability:

UL 94V-0 with low smoke and toxicity

Application temperature: -76°F to 500°F (-60°C to 260°C)

Color specifications:

Light brown

Military

specifications:

Material meets MIL specification MIL-P-46183; approved for use

by the Department of Defense

Halogen-free:

Yes

Environmental

compliance:

Compliant per European Directive 2002/95/EC on the Restriction

of Hazardous Substances (RoHS)

Oxygen index:

35

Radiation resistance:

1 x 109 Rads

applications

All wires and harnesses installed in aircraft

must be securely fastened to prevent relative

motion between harnesses that can cause

abrasion resulting in potential failure of the

electrical system. The Panduit cable spacer

minimizes relative motion and abrasion

between wires by using a specified cable tie

to secure two adjacent wires or wire bundles.

The spacer also incorporates best practices

in design and manufacturing to minimize any

potential abrasion caused by contact between

the spacer and the wire which it secures. It can

be used in multiple orientations to address the

majority of spacing needs in pressurized or

unpressurized areas of the aircraft.

key features and benefits

Multi-functional

Combines the functionality of three different products into one

easy-to-use device that maintains reliable separation between

wires; reduces inventory SKU's and simplifies installation;

reduces raw material stocking requirements

Abrasion resistant

Designed to minimize relative motion and abrasion between

adjacent wire harnesses and between itself and wiring to

reduce long-term wiring degradation; complies with major

industry regulations and guidelines which aids acceptance

by compliance engineers

Strong and light-weight

Optimized to provide exceptional strength in a small footprint

and very light-weight configuration is preferred for aerospace

wire management applications