www.panduit.com

SPECIFICATION SHEET

Category 6/Class E channel

Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6

and component performance:

and ISO 11801 Class E standards at swept frequencies

1 to 250 MHz

Exceeds component requirements of ANSI/TIA-568-C.2 Category 6

and ISO 11801 Class E standards at swept frequencies

1 to 250 MHz

FCC and ANSI compliance:

Meets all applicable ANSI/TIA-968-A requirements; contacts plated

with 50 microinches of gold for superior performance

PoE compliance:

Meets requirements of IEEE 802.3af and IEEE 802.3at for

PoE applications

IEC compliance:

Meets IEC 60603-7

RoHS compliance:

Compliant

UL rated:

UL 1863 approved

Conductor termination range:

Wire cap compatible with 24 – 22 AWG solid cable with conductor

insulation diameters of 0.035 in. to 0.048 in. and overall cable O.D.

0.200 in. to 0.330 in.

technical information

www.panduit.com

applications

specifications

Category 6/Class E, 8-position, UTP jack module shall

terminate solid, 4-pair, 24 – 22 AWG, 100 ohm unshielded

twisted pair cable and shall not require use of a punchdown

tool. UTP jack modules shall use a forward motion termination

method to optimize performance by maintaining cable pair

geometry while eliminating conductor untwist. The termination

cap shall be color-coded white to designate Category 6

performance and shall include a universal label coded for

T568A and T568B wiring schemes.

Mini-Com® TX6™ PLUS UTP Jack Modules are a

component of the TX6™ PLUS UTP Copper Cabling

System. This end-to-end system is interoperable and

backwards compatible, providing design flexibility to

protect network investments well into the future. With

certified performance to the ANSI/TIA-568-C.2

Category 6 and ISO 11801 Class E standards, this

system is ideal for today's high performance

workstation applications. With certified performance

to the ANSI/TIA-568-C.2 Category 6 and ISO 11801

Class E Edition 2.1 standards, these systems will

support the following applications:

• Ethernet 10BASE-T, 100BASE-T (Fast

Ethernet), 1000BASE-T (Gigabit Ethernet)

• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM

• Token Ring 4/16

• Digital video and broadband/baseband

analog video

• Voice over Internet Protocol (VoIP)

Mini-Com ® TX6 ™ PLUS UTP Jack Module

key features and benefits

100% performance tested

Confidence that each jack module will deliver the critical

electrical performance requirements

Utilizes enhanced

Optimizes performance by eliminating conductor untwist and

Giga-TX ™ Technology

reduces installation time and expense

Improved termination cap

Conductor retention slots simplify jack module termination

Modular

UTP jack modules snap in and out of all Mini-Com® Faceplates,

Modular Patch Panels and Surface Mount Boxes for easy moves,

adds and changes

True strain relief

Controls cable bend radius for long term installed performance

Individually serialized

Marked with quality control number for future traceability

RJ45 interface

Industry standard interface provides a quick and easy plug and

play connection to RJ45 patch cords; backwards compatible

Identification

Can be clearly identified with optional labels and icons for

port identification

Termination tools (optional)

CGJT termination tool ensures conductors are fully terminated

by utilizing a smooth forward motion without impact on critical

internal components for maximum reliability

Block out device (optional)

Provides a simple and secure method to control access to data

ports while not in use

TX6 ™ PLUS UTP

Copper Cabling System

Mini-Com ® TX6 ™ PLUS

UTP Jack Module

Jack module:

CJ688TPIW*

TX6000 ™ UTP Copper Cable

Plenum:

PUP6004**

Riser:

PUR6004**

LSZH:

PUL6004**

CM:

PUC6004**

TX6 ™ PLUS UTP Patch Cords

CM (foot lengths):

UTPSP^Y

CM (meter lengths): UTPSP^^MY

LSZH

(meter lengths):

UTPSPL^^MY

Mini-Com ® Angled

Modular Patch Panels

24-port, 1 RU:

CPPLA24WBLY

48-port, 2 RU:

CPPLA48WBLY

Mini-Com ® Flat Modular

Patch Panels

24-port, 1 RU:

CPPL24WBLY

48-port, 2 RU:

CPPL48WBLY

For additional modular and punchdown patch

panels, visit www.panduit.com.

Tools and Accessories

Jack module

termination tool:

CGJT

Wire snipping tool:

CWST

Wire snipping tool:

CJAST

Clear dust cap:

MDC-C

Block out device:

PSL-DCJB-^^^

Phone icons:

CIPIW-C+

Data icons:

CIDIW-C+

*To designate color other than IW (Off White),

replace IW suffix with EI (Electric Ivory),

IG (International Gray), WH (White),

AW (Arctic White), BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green),

OR (Orange), or VL (Violet).

**To designate color, add suffix BU (Blue)

or WH (White). For additional cable colors,

contact customer service.

^For lengths 1 to 20 feet (one foot increments)

and 25, 30, 35, 40 feet, change the length

designation in the part number to the desired

length. For standard cable colors other than

Off White, add suffix BL (Black), BU (Blue), RD

(Red), YL (Yellow), GR (Green), OR (Orange)

or VL (Violet). For example, the part number

for a blue 15-foot patch cord is UTPSP15BUY.

^^For lengths 1 to 10 meters (one meter

increments) and 0.5, 1.5, 2.5, 15, 20, meters,

change the length designation in the part

number to the desired length. For standard

cable colors other than Off White, add suffix

BL (Black), BU (Blue), RD (Red), YL (Yellow),

GR (Green), OR (Orange) or VL (Violet). For

example, the part number for a blue 15-meter

patch cord is UTPSP15MBUY.

^^^To designate color other than Red, add

suffix BL (Black), BU (Blue), YL (Yellow), GR

(Green), OR (Orange), IW (Off White) or IG

(International Gray) at end of the part number.

10/package.

+To designate color other than IW (Off White),

replace IW with EI (Electric Ivory), IG

(International Gray), BL (Black), BU (Blue), RD

(Red), YL (Yellow), GR (Green), OR (Orange)

or VL (Violet) in the part number. 100/package.

Contact customer service for bulk packaged

jack modules and patch cords.