515-03633 datasheet(2/41 Pages) HELLERMANNTYTON

2 / 41 page

Material

Polyolefin, Cross-linked (POX)

Colour

Black (BK), Yellow (YE),

White (WH)

Shrink Ratio

3:1

Minimum Shrink

Temperature

+90 °C

Operating

Temperature

-55 °C to +135 °C

Dielectric Strength

19.7 kV/mm

Specification

UL-224 as +125C, 600V (VW-1), SAE-

AS81531, MIL-STD-202G Method 215K,

AMS-DTL-23053/5 Class 1 and 3

Identification Systems

Wire and Cable Markers

299

5.2

Article-No.

Type

Colour

Pack Cont. (m)

556-00141 TTDTHOUT 100MM

Black (BK)

300

556-00103 TTRC+ 100MM

Black (BK)

300

556-00161 TT822OUT8 110MM Silver Grey (GY)

300

556-00133 TTRW 100MM

White (WH)

300

All dimensions in mm. Subject to technical changes.

ShrinkTrak

Ribbons - TTRA, TTRC+.

Type

Supplied Ø D

Recov. Ø d

Wall (WT)

HST 3-1

3.0

1.0

0.6

HST 4.8-1.6

4.8

1.6

0.65

HST 6-2

6.0

2.0

0.7

HST 9-3

9.0

3.0

0.8

HST 12-4

12.0

4.0

0.85

HST 18-6

18.0

6.0

1.0

HST 24-8

24.0

8.0

1.2

All dimensions in mm. Subject to technical changes.

Technical Table

Material Data

Recommended ribbons for printing on ShrinkTrak

Features and Benefits

on recovered markers.

TTRC+ passes the following standards; MIL-

STD-202G (method 215J), BS 4G 198-3

(type 11A), and Def. Stan. 59-97 Issue 3

Type 2a on recovered markers.

Those people requiring similar excellent

print characteristics on black heatshrink can

use TT822OUT8. The ribbon colour is silver

grey and gives a good contrast to the black

material. TT822OUT8 passes MIL-STD-202G

(method 215J) on recovered markers.

Should you need the best contrast on a

black heatshrink please use TTRW. TTRW

passes MIL-STD-202G (method 215J) on

recovered markers.

Using the correct mix of ribbon and material

ensures you have the best possible print

performance. The range of ribbons offered

is designed to give maximum print clarity

and performance where possible.

The highest standard of mark permanence

and clarity is achieved when printing on

white or yellow heatshrink using either

TTDTHOUT 100MM or TTRC+ 100MM.

Areas of known application is for mass tran-

sit, military, and medical markets.

TTDTHOUT passes the following standards;

MIL-STD-202G (method 215J) on supplied

and recovered markers, BS 4G 198-3 (type

11A), and Def. Stan. 59-97 Issue 3 Type 2a

ShrinkTrak Ladder style 3:1 UL grade

heatshrink wire markers, thermal transfer

ID: The standard

inside core dia-

meter is 25.4 mm.

298_315_chapter 5.2_prod 07_uk.qxp

08.08.2007

11:40

Seite 299

515-03633 Scheda tecnica(PDF) 2 Page - HellermannTyton.

515-03633 Scheda tecnica(HTML) 2 Page - HellermannTyton.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Scheda tecnica Scarica

Link URL