MSC7118 datasheet(41/60 Pages) FREESCALE

Il numero della parte	MSC7118

Spiegazioni elettronici	Low-Cost 16-bit DSP with DDR Controller

PDF	60 Pages

Scroll/Zoom	100%

Produttore elettronici	FREESCALE [Freescale Semiconductor, Inc]

Homepage	http://www.freescale.com

Logo

41 / 60 page

Hardware Design Considerations

MSC7118 Low-Cost 16-bit DSP with DDR Controller Data Sheet, Rev. 7

Freescale Semiconductor

3.2.2.1

Case 1

The power-up sequence is as follows:

Turn on the VDDIO (3.3 V) supply first.

Turn on the VDDC (1.2 V) supply second.

Turn on the VDDM (2.5 V) supply third.

Turn on the VREF (1.25 V) supply fourth (last).

The power-down sequence is as follows:

Turn off the VREF (1.25 V) supply first.

Turn off the VDDM (2.5 V) supply second.

Turn off the VDDC (1.2 V) supply third.

Turn of the VDDIO (3.3 V) supply fourth (last).

Use the following guidelines:

•

Make sure that the time interval between the ramp-down of VDDIO and VDDC is less than 10 ms.

•

Make sure that the time interval between the ramp-up or ramp-down for VDDC and VDDM is less than 10 ms for

power-up and power-down.

•

Refer to Figure 26 for relative timing for power sequencing case 1.

Figure 26. Voltage Sequencing Case 1

Time

Ramp-down

Ramp-up

VDDIO = 3.3 V

VDDM = 2.5 V

VDDC = 1.2 V

VREF = 1.25 V

<10 ms

MSC7118 Scheda tecnica(PDF) 41 Page - Freescale Semiconductor, Inc