M16CSLASH29 datasheet(374/499 Pages) RENESAS

Il numero della parte	M16C/29

Spiegazioni elettronici	RENESAS MCU M16C FAMILY / M16C/Tiny SERIES

PDF	499 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

374 / 499 page

20. Flash Memory Version

page 350

Figure 20.13 Block Erase Command (at use erase suspend)

NOTES:

1. Write the command code and data to even address.

2. Execute the clear status register command and block erase command at least 3 times until an

erase error is not generated when an erase error is generated.

3. In EW mode 0, allocate an interrupt vector table of an interrupt, to be used, to the RAM area

4. Refer to Figure 20.14.

Start

Block erase completed

Write the command code

xx2016 (1)

Write xxD016 to the highest-order

block address (1)

YES

FMR00=1?

Full status check (2,4)

FMR40=1

Interrupt service routine(3)

FMR41=1

YES

FMR46=1?

Access Flash Memory

Return

(Interrupt service routine end)

FMR41=0

(EW mode 0)

(EW mode 1)

Start

Block erase completed

Write the command code

xx2016 (1)

Write xxD016 to the highest-order

block address (1)

YES

FMR00=1?

Full status check (2,4)

FMR40=1

FMR41=0

Interrupt service routine

Access Flash Memory

Return

(Interrupt service routine end)

M16C/29 Scheda tecnica(PDF) 374 Page - Renesas Technology Corp

M16C/29 Scheda tecnica(HTML) 374 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL