H838532H datasheet(45/508 Pages) RENESAS

Il numero della parte	H838532H

Spiegazioni elettronici	16-Bit Single-Chip Microcomputer H8 Family / H8/300H Super Low Power Series

PDF	508 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

45 / 508 page

Section 2 CPU

Rev. 1.00 May 30, 2008 Page 25 of 484

REJ09B0436-0100

SP (ER7)

Empty area

Stack area

Figure 2.4 Relationship between Stack Pointer and Stack Area

2.2.2

Program Counter (PC)

This 24-bit counter indicates the address of the next instruction the CPU will execute. The length

of all CPU instructions is 2 bytes (one word), so the least significant PC bit is ignored. (When an

instruction is fetched, the least significant PC bit is regarded as 0). The PC is initialized when the

start address is loaded by the vector address generated during reset exception-handling sequence.

2.2.3

Condition-Code Register (CCR)

This 8-bit register contains internal CPU status information, including an interrupt mask bit (I) and

half-carry (H), negative (N), zero (Z), overflow (V), and carry (C) flags. The I bit is initialized to 1

by reset exception-handling sequence, but other bits are not initialized.

Some instructions leave flag bits unchanged. Operations can be performed on the CCR bits by the

LDC, STC, ANDC, ORC, and XORC instructions. The N, Z, V, and C flags are used as branching

conditions for conditional branch (Bcc) instructions.

For the action of each instruction on the flag bits, see appendix A.1, Instruction List.

H838532H Scheda tecnica(PDF) 45 Page - Renesas Technology Corp