R8C13 datasheet(31/224 Pages) RENESAS

Il numero della parte	R8C13

Spiegazioni elettronici	16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY/R8C/Tiny SERIES

PDF	224 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

31 / 224 page

Rev.1.20

Jan 27, 2006

page 20 of 205

REJ09B0111-0120

R8C/13 Group

5.2 Software Reset

When the PM03 bit in the PM0 register is set to “1” (microcomputer reset), the microcomputer has its

pins, CPU, and SFR initialized. Then the program is executed starting from the address indicated by

the reset vector.

After reset, the low-speed on-chip oscillator clock divided by 8 is automatically selected for the CPU.

Some SFRs are not initialized by the software reset. Refer to Chapter 4, “SFR.”

5.3 Watchdog Timer Reset

Where the PM12 bit in the PM1 register is “1” (reset when watchdog timer underflows), the microcom-

puter initializes its pins, CPU and SFR if the watchdog timer underflows. Then the program is ex-

ecuted starting from the address indicated by the reset vector.

After reset, the low-speed on-chip oscillator clock divided by 8 is automatically selected for the CPU.

Some SFRs are not initialized by the watchdog timer reset. Refer to Chapter 4, “SFR.”

5.2 Software Reset, 5.3 Watchdog Timer Reset

R8C13 Scheda tecnica(PDF) 31 Page - Renesas Technology Corp