LT1714IGN datasheet(7/16 Pages) LINER

7 / 16 page

LT1713/LT1714

PI FU CTIO S

LT1713

V+ (Pin 1): Positive Supply Voltage, Usually 5V.

+ IN (Pin 2): Noninverting Input.

– IN (Pin 3): Inverting Input.

V– (Pin 4): Negative Supply Voltage, Usually 0V or – 5V.

LATCH ENABLE (Pin 5): Latch Enable Input. With a logic

high the output is latched.

GND (Pin 6): Ground Supply Voltage, Usually 0V.

Q (Pin 7): Noninverting Output.

Q (Pin 8): Inverting Output.

LT1714

– IN A (Pin 1): Inverting Input of A Channel Comparator.

+ IN A (Pin 2): Noninverting Input of A Channel

Comparator.

V – (Pins 3, 6): Negative Supply Voltage, Usually – 5V. Pins

3 and 6 should be connected together externally.

V + (Pins 4, 5): Positive Supply Voltage, Usually 5V. Pins

4 and 5 should be connected together externally.

+ IN B (Pin 7): Noninverting Input of B Channel

Comparator.

– IN B (Pin 8): Inverting Input of B Channel Comparator.

LATCH ENABLE B (Pin 9): Latch Enable Input of B Channel

Comparator. With a logic high, the B output is latched.

GND (Pin 10): Ground Supply Voltage of B Channel

Comparator, Usually 0V.

Q B (Pin 11): Noninverting Output of B Channel

Comparator.

Q B (Pin 12): Inverting Output of B Channel

Comparator.

Q A (Pin 13): Inverting Output of A Channel

Comparator.

Q A (Pin 14): Noninverting Output of A Channel

Comparator.

GND (Pin 15): Ground Supply Voltage of A Channel

Comparator, Usually 0V

LATCH ENABLE A (Pin 16): Latch Enable Input of A Chan-

nel Comparator. With a logic high, the A output is latched.

LT1714IGN Scheda tecnica(PDF) 7 Page - Linear Technology