| Motore di ricerca datesheet componenti elettronici |
|
SPPOSC Scheda tecnica(PDF) 2 Page - Frequency Devices, Inc. |
|
|
|||||||||||||||||||||||||||||
SPPOSC Scheda tecnica(HTML) 2 Page - Frequency Devices, Inc. |
|
2 / 4 page ![]() SPPOSC Series 2” X 2” (Low Distortion) 1 Hz to 102.4 kHz Oscillators: Dual Channel 8 or 9-Bit Frequency Selectable & Quadrature 2 1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176 e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com Frequency Selection Data Port Data Format • Logic “0” 0VDC Min – 2VDC Max • Logic “1” 3.5VDC Min – 5Vdc Max Bit Weighting (Binary Coded) D0 LSB D7 or D8 (for 9-bits) MSB Frequency: 256:1 (8-bit dual), or 512:1 (9-bit single) ____________________________________________ 1. The frequency selection data word bus consists of D0 to D7 for 8-bit programming and D0 to D8 for 9-bit programming. 2. For dual Channel 8-Bit programming D8 is Channel Select and requires a minimum of 21 µsecs set-up time at a logic “1”, 5volts for channel 2 or logic “0”, 0 volts, for Channel 1 3. For an 8-bit dual channel unit, the Program enable or “Latch pin” is D9. To enable a program change, this pin must be pulled to a logic high “1” or 5 volts. If the pin is low, a frequency change will not be read and the channels will continue to run the previous values. 4. The D0 – D9 bus data are checked simultaneously. New frequency selection data must be present or updated at the time Channel select occurs to be valid. The Program enable or “Latch” pin must be high. While the latch pin is high, the Frequency data must remain on the bus until the user applies the next frequency change. The pins do not float during programming! The frequency ports are polled by the system every 21 µseconds. Within 21 µsecs of programming, if the latch goes low, the programmed values are retained and the pins may float. D9 Enable/Latch D8 Ch Sel 9-Bit Programming Table MSB --- --- --- --- --- --- --- LSB Bit Weight 2 8 D8 2 7 D7 2 6 D6 2 5 D5 2 4 D4 2 3 D3 2 2 D2 2 1 D1 2 0 D0 fc Corner Frequency 0 0 0 0 0 0 0 0 0 fmax/512 0 0 0 0 0 0 0 0 1 fmax/256 0 0 0 0 0 0 0 1 1 fmax/128 0 0 0 0 0 0 1 1 1 fmax/64 0 0 0 0 0 1 1 1 1 fmax/32 0 0 0 0 1 1 1 1 1 fmax/16 0 0 0 1 1 1 1 1 1 fmax/8 0 0 1 1 1 1 1 1 1 fmax/4 0 1 1 1 1 1 1 1 1 fmax/2 1 1 1 1 1 1 1 1 1 fmax 8-Bit Programming Table MSB --- --- --- --- --- --- LSB Bit Weight 2 7 D7 2 6 D6 2 5 D5 2 4 D4 2 3 D3 2 2 D2 2 1 D1 2 0 D0 fc Corner Frequency 0 0 0 0 0 0 0 0 fmax/256 0 0 0 0 0 0 0 1 fmax/128 0 0 0 0 0 0 1 1 fmax/64 0 0 0 0 0 1 1 1 fmax/32 0 0 0 0 1 1 1 1 fmax/16 0 0 0 1 1 1 1 1 fmax/8 0 0 1 1 1 1 1 1 fmax/4 0 1 1 1 1 1 1 1 fmax/2 1 1 1 1 1 1 1 1 fmax Tsu 21 µsecs min DATA VALID D0 to D7 Frequency Select |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |