| Motore di ricerca datesheet componenti elettronici |
|
HC210 Scheda tecnica(PDF) 48 Page - Altera Corporation |
|
|
|||||||||||||||||||||||||||||
HC210 Scheda tecnica(HTML) 48 Page - Altera Corporation |
|
48 / 228 page ![]() 4–6 Altera Corporation September 2008 HardCopy Series Handbook, Volume 1 VOL Low-level output voltage IOL = 1 mA (2), (3) —0.4 V Notes to Table 4–7: (1) HardCopy II devices VCCIO voltage-level support of 2.5 ± -5% is narrower than defined in the normal range of the EIA/JEDEC Standard. (2) Drive strength is programmable according to values in Tables 2–10, 2–12, and 2–14. (3) Drive strength varies based on pin location. Refer to the Description, Architecture, and Features chapter in the HardCopy II Device Family Data Sheet section in volume 1 of the HardCopy Series Handbook for more information. Table 4–7. 2.5-V I/O Specifications (Part 2 of 2) Symbol Parameter Conditions Minimum Maximum Unit Table 4–8. 1.8-V I/O Specifications Symbol Parameter Conditions Minimum Maximum Unit VCCIO (1) Output-supply voltage — 1.71 1.89 V VIH High-level input voltage — 0.65 × VCCIO 2.25 V VIL Low-level input voltage — -0.3 0.35 × VCCIO V VOH High-level output voltage IOH = -2 to -8 mA (2), (3) VCCIO – 0.45 — V VOL Low-level output voltage IOL = 2 to 8 mA (2), (3) —0.45 V Notes to Table 4–8: (1) HardCopy II devices VCCIO voltage-level support of 1.8 ± -5% is narrower than defined in the normal range of the EIA/JEDEC Standard. (2) Drive strength is programmable according to values in Tables 2–10, 2–12, and 2–14. (3) Drive strength varies based on pin location. Refer to the Description, Architecture, and Features chapter in the HardCopy II Device Family Data Sheet section in volume 1 of the HardCopy Series Handbook for more information. Table 4–9. 1.5-V I/O Specifications (Part 1 of 2) Symbol Parameter Conditions Minimum Maximum Unit VCCIO (1) Output-supply voltage — 1.425 1.575 V VIH High-level input voltage — 0.65 × VCCIO VCCIO + 0.3 V VIL Low-level input voltage — -0.3 0.35 × VCCIO V VOH High-level output voltage IOH = -2 mA (2), (3) 0.75 × VCCIO —V |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |