V7.1 1/08

6

Zoom and Pan on Graphs

To zoom in, press the <Ctrl> key and click the left mouse button over the desired point;

release the <Ctrl> key after the mouse button is pressed. The view resolution increases

until the mouse button is released. To zoom out, click the right mouse button.

To pan, press the <Ctrl-Shift> keys and click the left mouse button over the desired point,

and then drag the mouse to another point. The graph view scrolls so that the original point

now appears under the new mouse cursor location. Drag the mouse anywhere on the

screen.

To restore the view to its original state (after zooming or panning), press and hold the left

mouse button and drag the line on the Offset or Range knob (located in the DISPLAY

CONTROLS section).

Horizontal Axis select switch

Use the mouse to control the switch and select Record number or Time (HH:MM:SS) label

for the horizontal axis of the graph.

Warning message

A warning message will appear on the lower left if the Datalogger is disconnected from the

PC.

<< WARNING: Data Logger not plugged into interface module! >>

Display Control

After downloading or retrieving a record, the numbers on the "Offset" and "Range" knobs

will change to:

Offset: 0000/5000/10000/15000

Range: 50/250/500/1K/2K/4K/8K/12K/16K

Save File

To save a transferred data file

Click on SAVE FILE, select a folder, and name the data file.