MM560 datasheet(13/21 Pages) EXTECH

13 / 21 page

Analog bar-graph

The analog bar graph provides a visual indication of measurement like a

traditional analog meter needle. It is excellent in detecting faulty

contacts, identifying potentiometer clicks, and indicating signal spikes

during adjustments.

Default Functions

The Multimaster™ will set the function last used as the default function.

For example, if dBm is last used in the VAC position, the meter will

display dBm the next time that function is selected.

Backlit display

The MultiMaster™ series multimeters are equipped with a backlight for

viewing the LCD display in poorly lit areas.

Data Hold

The HOLD function freezes the reading on the display for later viewing.

Manual and Automatic Ranging

The MultiMaster™ series multimeters are Autoranging, with manual

override.

Smart Power Auto Power Off (APO)

Smart Power automatically shuts the meter down after approximately 17

minutes of inactivity. APO can be disabled on power up and is also

disabled if a signal is present.

Audible Beeper

The audible beeper confirms a keystroke. It can be disabled.

MAX/MIN mode

MAX/MIN mode stores the minimum and maximum readings in memory

for later viewing.

Relative mode

Relative mode allows the meter to display the difference between the

actual measurement and a stored reference value.

PeakC capture mode

PeakC captures voltage or current signals that have durations as short

as 0.8ms. This mode is available in DCV, ACV, DCA, & ACA functions.

Sealing

The meter is sealed using an o-ring and gasket to prevent moisture and

dust from entering.

Rubber Holster

The heavy duty rubber holster provides drop resistance, good grip and

can be removed and washed if necessary.

MM560 Scheda tecnica(PDF) 13 Page - Extech Instruments Corporation.