PS9115-V datasheet(5/14 Pages) NEC

5 / 14 page

Data Sheet PN10267EJ05V0DS

PS9115

*1 Typical values at TA = 25

°C

*2 Because a high-level output current (IOH) of 300

μA or more may be output when the temperature is 0°C or less

and when VCC is around 3 to 4 V, it is important to confirm the characteristics (operation with the power supply

on and off) during design, before using this device.

*3 Test circuit for propagation delay time

Input

Output

1.5 V

VOH

VOL

tPHL

tPLH

IF (ON)

50% IF (ON)

CL includes probe and stray wiring capacitance.

Pulse input (IF)

VO (monitor)

Input

(monitor)

(PW = 500 ns,

Duty cycle = 1/2)

VCC = 5 V

0.1 F

CL =

30 pF

2.5 k

1.3 k

VCC = 5 V

*4 Test circuit for common mode transient immunity

90%

10%

1 kV

0 V

VOH

2 V

0.8 V

VOL

VCM

(IF = 0 mA)

(IF = 7.5 mA)

CL includes probe and stray wiring capacitance.

VO (Monitor)

VCC = 5 V

0.1 F

CL = 15 pF

SW IF

VCM

USAGE CAUTIONS

1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static

electricity when handling.

2. By-pass capacitor of 0.1

μF is used between VCC and GND near device. Also, ensure that the distance between

the leads of the photocoupler and capacitor is no more than 10 mm.

3. Avoid storage at a high temperature and high humidity.

PS9115-V Scheda tecnica(PDF) 5 Page - NEC

PS9115-V Scheda tecnica(HTML) 5 Page - NEC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Scheda tecnica Scarica

Link URL