XRT91L31 datasheet(21/41 Pages) EXAR

Il numero della parte	XRT91L31

Spiegazioni elettronici	STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER

PDF	41 Pages

Scroll/Zoom	100%

Produttore elettronici	EXAR [Exar Corporation]

Homepage	http://www.exar.com

Logo

21 / 41 page

XRT91L31

REV. 1.0.2

STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER

2.8

Receive Parallel Output Interface

The 8-bit Single-Ended LVTTL running at 77.76 Mbps (STS-12/STM-4) or 19.44 Mbps (STS-3/STM-1) parallel

data output of the receive path is used to interface to a SONET Framer/ASIC synchronized to the recovered

clock. A simplified block diagram is shown in Figure 9.

2.9

Disable Parallel Receive Data Output Upon LOS

The parallel receiver outputs are automatically pulled "Low" or forced to a logic state of "0" during a LOS

condition (DLOOP or ALOOP not activated) to prevent data chattering unless LOS detection is disabled by

asserting DLOSDIS and keeping LOSEXT input pin "high." In addition, the user can also assert LOSEXT input

pin from the optical module to force an LOS and mute the parallel receiver outputs as well when DLOSDIS is

not enabled (LOW), see Figure 7).

FIGURE 9. RECEIVE PARALLEL OUTPUT INTERFACE BLOCK

SONET Framer/ASIC

XRT91L31

STS-12/STM-4

STS-3/STM-1

Transceiver

RXPCLKO

RXDO[7:0]

XRT91L31 Scheda tecnica(PDF) 21 Page - Exar Corporation