http://www.ddknet.co.jp

◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.

 Your catalogue checking the latest speifications with our drawings would be highly appreciated.

FF19CE Series 【CE-ATA 8Bit Standard】

RoHS

Compliant

RoHS

Compliant

090803

0.4 mm Pitch Back-Lock FPC Connector

・FF19CE series is a FPC connector which is

0.4mm pitch,1.25mm height and 4.21mm depth.

・It is interface connector for smaller than 1.8" HDD.

・Conforming to CE-ATA 8bit standard (HDD side)

・Front-acccess back lock design is short depth and

suitable to compact device.

・Cable lock mechanism retains FPC.

・Mid-mounting design which is mounted across the PCB enables to operate the lock lever

 from reverse side.

・Connectors deliver with the lock lever opened. Time saving for FPC inserting operation.

・Both upper and lower contacts design accepts any FPC inserting directions.

・Back lock mechanism enables to retain FPC against pulling upward direction.

・The lock lever does not fall down to the opposite side.

・Board lock pins prevent the mounting gap.

・Nickel barrier prevents solder wicking.

Portable HDD

Rated Voltage

50V AC(r.m.s.)

Rated Current

0.5A / Contact

Dielectric Withstanding Voltage 200V AC(r.m.s.) / 1 minute

Insulation Resistance

100 MΩ min. at 500V DC

Contact Resistance

50m Ω max.

Item

Material / Finish

Contact

Copper Alloy /Au(Flash) over Ni Plating

Housing

LCP Resin (UL94V-0) / Ivory

Lock Lever

PPS Resin (UL94V-0) / Black

OUTLINE

FEATURE

APPLICATIONS

SPECIFICATIONS

MATERIAL/FINISH