MCP4141 datasheet(32/88 Pages) MICROCHIP

Il numero della parte	MCP4141

Spiegazioni elettronici	7/8-Bit Single/Dual SPI Digital POT with Non-Volatile Memory

PDF	88 Pages

Scroll/Zoom	100%

Produttore elettronici	MICROCHIP [Microchip Technology]

Homepage	http://www.microchip.com

Logo

32 / 88 page

MCP414X/416X/424X/426X

DS22059B-page 32

bit 0

WP:

EEPROM Write Protect Status bit (Refer to Section “EEPROM Write Protect” for further

information)

This bit indicates the status of the write protection on the EEPROM memory. When Write Protect is

enabled, writes to all non-volatile memory are prevented. This includes the General Purpose EEPROM

memory, and the non-volatile Wiper registers. Write Protect does not block modification of the volatile

wiper register values or the volatile TCON register value (via Increment, Decrement, or Write

commands).

This status bit is an OR of the devices Write Protect pin (WP) and the internal non-volatile WP bit. High

Voltage commands are required to enable and disable the internal WP EEPROM bit.

= EEPROM memory is Write Protected

= EEPROM memory can be written

STATUS REGISTER (CONTINUED)

Note 1:

Requires a High Voltage command to modify the state of this bit (for Non-Volatile devices only). This bit is

Not directly written, but reflects the system state (for this feature).

MCP4141 Scheda tecnica(PDF) 32 Page - Microchip Technology