| Motore di ricerca datesheet componenti elettronici |
|
ATtiny5 Scheda tecnica(PDF) 110 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATtiny5 Scheda tecnica(HTML) 110 Page - ATMEL Corporation |
|
110 / 168 page ![]() 110 8127C–AVR–10/09 ATtiny4/5/9/10 Configuration bits are not affected by a chip erase but they can be cleared using the configura- tion section erase command (see “Erasing the Configuration Section” on page 113). Note that configuration bits are locked if Non-Volatile Lock Bit 1 (NVLB1) is programmed. 15.3.3.1 Latching of Configuration Bits All configuration bits are latched either when the device is reset or when the device exits the external programming mode. Changes to configuration bit values have no effect until the device leaves the external programming mode. 15.3.4 Signature Section The signature section is a dedicated memory area used for storing miscellaneous device infor- mation, such as the device signature. Most of this memory section is reserved for internal use, as shown in Table 15-7. ATtiny4/5/9/10 have a three-byte signature code, which can be used to identify the device. The three bytes reside in the signature section, as shown in Table 15-7. The signature data for ATtiny4/5/9/10 is given in Table 15-8. 15.3.5 Calibration Section ATtiny4/5/9/10 have one calibration byte. The calibration byte contains the calibration data for the internal oscillator and resides in the calibration section, as shown in Table 15-9. During reset, the calibration byte is automatically written into the OSCCAL register to ensure correct fre- quency of the calibrated internal oscillator. Table 15-7. Signature bytes Signature word address Signature word data High byte Low byte 0x00 Device ID 1 Manufacturer ID 0x01 Reserved for internal use Device ID 2 0x02 ... 0x0F Reserved for internal use Reserved for internal use Table 15-8. Signature codes Part Signature Bytes Manufacturer ID Device ID 1 Device ID 2 ATtiny4 0x1E 0x8F 0x0A ATtiny5 0x1E 0x8F 0x09 ATtiny9 0x1E 0x90 0x08 ATtiny10 0x1E 0x90 0x03 Table 15-9. Calibration byte Calibration word address Calibration word data High byte Low byte 0x00 Reserved Internal oscillator calibration value 0x01 ... 0x07 Reserved Reserved |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |