SS8044 datasheet(2/5 Pages) SSC

2 / 5 page

SS8044

12/31/2006 Rev. 1.01

www.SiliconStandard.com

MAXIMUM RATINGS (TA=25℃ unless otherwise specified)

Input Voltage………………………………..…….…….7V

Power Dissipation Internally Limited

(Note2)

Maximum Junction Temperature…………………150°C

Storage Temperature Range..……-65°C

+150°C

Reflow Temperature (soldering, 10sec)............260°C

Thermal Resistance Junction to Ambient, (θJA)

SOT-223………………………….…………..…147°C/W

Thermal Resistance Junction to Case, (θJc)

SOT-223……………………………….…………27°C/W

OPERATING CONDITIONS

Input Voltage………….…….…..……..….……4V ~ 6.5V

Temperature Range…………………..-40°C

85°C

ELECTRICAL CHARACTERISTICS

VIN =5V, IO = 600mA, CIN=10µF, COUT =10µF. All specifications apply for TA = TJ = 25°C.[Note 3]

PARAMETER

CONDITION

MIN

TYP

MAX

UNIT

Output Voltage

10mA < IO <600mA

3.234

3.3

3.366 V

Line Regulation

4V < VIN < 6V, IO = 10mA

---

10mA < IO < 600mA

---

Load Regulation

10mA < IO < 250mA

---

Quiescent Current VIN = 5V

---

0.3

---

Ripple Rejection

fi = 120 Hz, 1VP-P, Io = 100mA

---

IO = 600mA

---

0.65

---

Dropout Voltage

IO = 250mA

---

0.25

---

Output Current

---

600

---

Short Circuit

---

0.65

---

Current Limit

0.8

Over Temperature

---

145

---

°C

NOTE:

1. Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating

Conditions are conditions under which the device functions but the specifications might not be

guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics.

2. The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total

thermal resistance, JA, and ambient temperature TA. The maximum allowable power dissipation at

any ambient temperature is Tjmax-TA / JA. If this dissipation is exceeded, the die temperature will

rise above 150°C and IC go into thermal shutdown. The JA of SOT-223 package is 147°C/W (See

Recommended Minimum Footprint).

3. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient

as possible.

The type of output capacitor should be tantalum or aluminum.

SS8044 Scheda tecnica(PDF) 2 Page - Silicon Standard Corp.

SS8044 Scheda tecnica(HTML) 2 Page - Silicon Standard Corp.

Html Pages

1 2 3 4 5

Scheda tecnica Scarica

Link URL