Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics

Tables.

Note 2: Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of JEDEC)

Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).

Note 3: The maximum power dissipation is a function of T

P

Note 4: Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will

also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material.

Note 5: Limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlations using Statistical Quality

Control (SQC) method.

Note 6: Positive current corresponds to current flowing into the device.

Note 7: The part is not short circuit protected and is not recommended for operation with low resistive loads. Typical sourcing and sinking output current curves

are provided in the Typical Performance Characteristics and should be consulted before designing for heavy loads.

Connection Diagrams

5-Pin SC70

20203339

Top View

8-Pin SOIC

20203340

Top View

Ordering Information

Package

Part Number

Package Marking

Transport Media

NSC Drawing

5-Pin SC70

LMV641MG

A99

1k Units Tape and Reel

MAA05A

LMV641MGE

250 Units Tape and Reel

LMV641MGX

3k Units Tape and Reel

8-Pin SOIC

LMV641MA

LMV641MA

95 Units/Rail

M08A

LMV641MAE

250 Units Tape and Reel

LMV641MAX

2.5k Tape and Reel

www.national.com

4