F–50

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F

9000 Series

Power Toggle Switches

ACTUATOR

BUSHING

15/32-32 UNS-2A

1/4-40 UNS-2A

1/4-40 UNS-2A

Locking Positions

2 Position Lock

1/4-40 UNS-2A

1/4-40 UNS-2A

K

LOCKING LEVER, .650" HIGH, THREADED

H

.296" HIGH, THREADED, FLAT

CW

SPLASHPROOF, 15/32 BUSHING

L40

LEVER HANDLE

WITHOUT CAP

L43

PLASTIC LEVER HANDLE WITH

ANTIROTATION AND CAP, P/N 4812

K1

LOCKING LEVER, .680" HIGH, THREADED

NOTE: To prevent accidental actuation, toggles must be lifted before being

actuated. When released, toggles again lock in place. Bushing option code

not required. Overtightening mounting nut may cause actuator to bind.

NOTE: Lever handle actuator L43 supplied, but not installed. For interchangeability, order L40 actuator option and order lever handles separately, see page F-53.

Antirotation is standard on all actuators, provides ‘anti-push-in’ feature.

Internal actuator seal standard. External

bushing seal available separately from APM

Hexseal, part # MFS-60064.

NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.

Black hardware is supplied when either black bushings or actuators are specified. Optional mounting

nut and locking ring styles and finishes available, see Section N.

Will withstand 12 in./lbs. of torque with no distortion.

For T & T1 actuators only.

Finish: Matte

Other colors available, consult Customer

Service Center.

No color choice required.

2

BLACK

NONE

No Actuator Color (L40 option)

ACTUATOR CAP COLOR

OPTION

CODE

NONE

NICKEL

2

BLACK

BUSHING

FINISH

OPTION

CODE

.

NONE

NATURAL ALUMINUM–With Nickle Plated Bushing

2

BLACK ANODIZED ALUMINUM

ACTUATOR CAP FINISH

OPTION

CODE

BUSHING FINISH

BUSHING

ACTUATOR FINISH

ACTUATOR