8 of 9

RFSA2624

DS110408

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.

Evaluation Board Schematic

Evaluation Board Bill of Materials (BOM)

NOTE: Parts with * following the Reference Designator should not be populated on PCBA. RFMD devices (DUT) may require baking per IPC/JEDEC J-STD-020 for a mini-

mum of 24 hours at 125 +5/-0 °C. Assembly must take place within 12 hours of bake completion. Manufacturers' P/Ns are subject to change by the manufacturers fol-

lowing the issue of this document and are thereby included for reference only. Contact RFMD Corporate Engineering Materials with questions regarding specific

Manufacturers' P/Ns. Shaded lines indicate approved alternate components.

Description

Reference Designator

Manufacturer

Manufacturer's P/N

PCB

RFSA26X4410(B)

CAP, 680pF, 10%, 50V, X7R, 0402

C13, C15, C16, C17

Murata

GRM155R71H681KA01E

CAP, 0.1uF, 10%, 10V, X5R, 0402

C11, C12, C19, C20

Taiyo Yuden (USA), Inc.

RM LMK105BJ104KV

CAP, 1000pF, 10%, 50V, X7R, 0402

C7

Taiyo Yuden (USA), Inc.

RM UMK105BJ102KV-F

RES, 0 OHM, 0402

R1, R2, R4, R5, R8

Kamaya, Inc

RMC1/16SJPTH

DNI

C1-C6, C8, C9, C14, C18, R3, R6-7

CONN, SMA, END LNCH, UNIV, HYB MNT, FLT

J1, J2, J99, J100

Heilind Electronics

PER MAT-21-1038

CONN, HDR, ST, PLRZD, 9-PIN

P1

ITW Pancon

MPSS100-9-C

RFSA2624SB

U1

RFMD

RFSA2624