- 1 -

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books,

etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

SM3513

DESCRIPTION

The SM3513 is a CMOS 4-bit single-chip micro-

computer for databank incorporating data memory

RAM, LCD driver (the output is adjustable in 16

steps for various contrast), key/switch input circuit,

8-bit parallel I/O port, 3 output ports, external mem-

ory control circuit, buzzer circuit and voltage detec-

tor circuit. One of three ports contains special out-

put circuit for infrared (IR) communication. It is easy

to realize timer function by timer signal interrupt

since the oscillator circuit is built-in.

FEATURES

• ROM capacity :

Program ROM

24 k x 23 bits

Character ROM

6 x 8 x 256 bits

Constant ROM

1 k x 4 bits

• RAM capacity :

Working RAM

256 x 4 bits

Display RAM

74 x 32 bits

Data RAM

512 x 8 bits

• Memory expansion (external) : 16 M x 8 bits x 4

• Buil-in battery detector

• LCD display : 74-segment x 32-common

• I/O ports :

Parallel I/O

8 bits

Input

2 bits

Output

3 bits

Buzzer output

1 bit (4 kHz)

Key input

6 bits

• Standby release : 2 events (Timer signal, key input)

• LCD contrast adjustable : 16 levels

• Built-in oscillator :

• Instruction cycle time : 3 µs

• Operating temperature : –10 to +60°C

• Supply voltage : 3.8 to 6.0 V

• Package : 160-pin QFP (QFP160-P-2828)

[Test Sample only]

SM3513

4-Bit Single-Chip Microcomputer

(For Data Bank Use)

System clock (built-in CR oscillator)

1 MHz

(external ceramic resonator)

1 MHz

Timer (built-in CR oscillator)

32.8 kHz

(external crystal)

32.768 kHz