11

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

11 - 58

Evaluation PCB

The circuit board used in the application should

be generated with proper RF circuit design tech-

niques. Signal lines at the RF port should have

50 Ohm impedance and the package ground leads

and package bottom should be connected directly

to the ground plane similar to that shown above. The

evaluation circuit board shown above is available

from Hittite Microwave Corporation upon request.

Item

Description

J1 - J3

PCB Mount SMA RF Connector

J4 - J6

DC Pin

C1, C2

100 pF Capacitor, 0603 Pkg.

U1

HMC232LP4 / HMC232LP4E SPDT Switch

107602 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

GaAs MMIC SPDT NON-REFLECTIVE

SWITCH, DC - 12 GHz

v04.0110