LPS331APY datasheet(9/36 Pages) STMICROELECTRONICS

Il numero della parte	LPS331APY

Spiegazioni elettronici	MEMS pressure sensor: 260-1260 mbar absolute digital output barometer

PDF	36 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

9 / 36 page

LPS331AP

Application hints

Doc ID 022112 Rev 7

9/36

Application hints

Figure 3.

LPS331AP electrical connection

The device core is supplied through the Vdd line. Power supply decoupling capacitors (100

nF ceramic, 10 µF aluminum) should be placed as near as possible to the supply pad of the

device (common design practice).

The functionality of the device and the measured data outputs are selectable and accessible

through the I2C/SPI interface. When using the I2C, CS must be tied high (i.e. connected to

Vdd_IO).

4.1

Soldering information

The HCLGA package is compliant with the ECOPACK® standard and it is qualified for

soldering heat resistance according to JEDEC J-STD-020.

10¬µ

Vdd

100nF

GND

Vdd_IO

Res

Digital signal from/to signal controller. Signal levels are defined through proper selection of Vdd_

TOP VIEW

Res

LPS331APY Scheda tecnica(PDF) 9 Page - STMicroelectronics