| Motore di ricerca datesheet componenti elettronici |
|
CT1820 Scheda tecnica(PDF) 3 Page - Aeroflex Circuit Technology |
|
|
|||||||||||||||||||||||||||||
CT1820 Scheda tecnica(HTML) 3 Page - Aeroflex Circuit Technology |
|
3 / 10 page ![]() Aeroflex Circuit Technology SCDCT1820 REV D 6/25/99 Plainview NY (516) 694-6700 3 PIN ASSIGNMENTS AND LOADING In the following table, the symbols are defined as follows: IIH= maximum input HIGH current with VIN = 2.5 volts IIL = maximum input LOW current with VIN = 0.4 volts IOH = maximum output HIGH current for VOUT = 2.5 volts minimum IOL = maximum output LOW current for VOUT = 0.4 volts maximum * Indicates use of an internal pull-up resistor Pin No Name CT1555-3 CT1820 CT1820-2 Description IIH (µA) IIL (µA) IOH (µA) IOL (mA IIH (µA) IIL (µA) IOH (µA) IOL (mA IOL (mA) 1 VCC +5V Power Input 2 D8 40 -0.4 -1000 2.4 20 -0.4 -1000 6.0 10.0 Part of 16 Bit TRI-STATE l/O 3 D9 4 D10 5 D11 6 D12 7 DATA SELECT 1 20 -0.4 20 -0.4 A LOW on this input applies the contents of the SECOND RANK REC’V REG to the D8-D15 I/O pins 8 A3* -1500 -3.2 20 -0.4 Part of 5 Bit ADDRESS INPUT 9 A2* 10 A1* 11 GROUND Logic and power return 12 A4* -1500 -3.2 20 -0.4 MSB of 5 Bit ADDRESS INPUT 13 A0* LSB of 5 Bit ADDRESS INPUT 14 VALID WORD -400 2.4 -400 4.0 4.0 A LOW on this output indicates receipt of avalid word 15 FAIL SAFE -400 2.4 -400 4.0 4.0 A HIGH on this output indicates termination of a transmitted message that exceeds 768µs. 16 COMM / DATA SYNC - 380 2.4 -400 4.0 4.0 A HIGH on this output indicates COMMAND (or STATUS) word reception. A LOW indicates DATA word reception. 17 CLOCK IN ±30 ±0.003 +100 -3 +100 -3 Input for 12MHz clock (20pf load). 18 CLOCK OUT -1000 1.0 -1000 1.0 1.0 Output of OSCILLATOR AND CLOCK DRIVER. 19 S / T SELECT 40 -0.8 20 -0.4 A HIGH on this input sets the unit in the self test mode. 20 CASE CASE CONNECTION 21 DATA IN 20 -0.4 20 -0.4 A HIGH on this input represents a positive state on the bus. 22 DATA IN 20 -0.4 20 -0.4 A HIGH on this input represents a negative state on the bus. (Pins 21 and 22 must both be high when the bus is inactive.) 23 ENC ENA 20 -0.4 20 -0.4 A LOW on this input initiates a transmit cycle. 24 SYNC SEL 20 -0.4 20 -0.4 Actuates COMMAND (or STATUS) sync for an input LOW and DATA sync for an input HIGH. 25 DATA OUT 360 2.4 -400 4.0 4.0 A HIGH on this output produces a positive state on the bus. 26 DATA OUT 360 2.4 -400 4.0 4.0 A HIGH on this output produces a negative state on the bus. 27 SEND DATA 380 2.4 -400 4.0 4.0 A HlGH on this output indicates data shifting during the transmit cycle. 28 ESC OUT 1000 1.2 -1000 1.2 1.2 LOW to HIGH transitions on thls output during HIGH SEND DATA cause the transmit cycle data shifting to occur. 29 XTAL A 12MHz (parallel resonant) crystal is connected between this pin and ground. 30 +5V OSC / CLOCK POWER +5V power for OSCILLATOR AND CLOCK POWER DRIVER. 31 DSC OUT -1000 1.2 -1000 1.2 1.2 LOW to HIGH transitions on this output during LOW TAKE DATA cause receive cycle data shifting to occur. 32 RT ENABLE -400 2.4 -400 4.0 4.0 A HIGH on this output indicates reception of a valid COMMAND (or STATUS) word containing the terminalís address. It also resets the FAIL SAFE. |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |