BQ28Z560-R1 datasheet(43/60 Pages) TI1

43 / 60 page

bq28z560-R1

www.ti.com

SLUSBD3 – APRIL 2013

CHARGING AND CHARGE TERMINATION INDICATION

Detection Charge Termination

For proper bq28z560-R1 operation, the cell charging voltage must be specified by the user. The default value for

this variable is in the data flash Charging Voltage.

The bq28z560-R1 detects charge termination when:

The battery current drops below the Taper Current for two consecutive Current Taper Window time periods

during charging AND battery voltage is equal to or higher than the Charging Voltage – Taper Voltage. Full

Charge is set when the taper condition is met.

Charge Inhibit

The bq28z560-R1 can indicate when battery temperature has fallen below or risen above predefined thresholds

Charge Inhibit Temp Low or Charge Inhibit Temp High. In this mode, the CHG_FET bit is set in the Control

[Charge Inhibit Temp Low + Temp Hys, Charge Inhibit Temp High – Temp Hys]. This is implemented to

indicate that an action is required by the battery charger.

The charging should not start when the temperature is below the Charge Inhibit Temp Low or above the

Charge Inhibit Temp High.

The charge FET should not turn off when Temp > Chg Inhibit Temp during charging .

The gas gauge will enter CHARGE INHIBIT mode only if it is in DISCHARGE mode or RELAX mode and Temp >

Chg Inhibit Low. Then it will set the Charging Current and Charging Voltage values to 0.

POWER MODES

The bq28z560-R1 has four power modes: NORMAL, SLEEP, HIBERNATE, and SHUTDOWN. In NORMAL

mode, the bq28z560-R1 is fully powered and can execute any allowable task. In SLEEP mode, the gas gauge

exists in a reduced-power state, periodically taking measurements and performing calculations. In HIBERNATE

mode, the gas gauge is in a low power state, but can be awakened by communication or certain I/O activity. The

device enters SHUTDOWN mode if there is a BATLOW condition detected or power down of the system.

Figure 7 shows the relationship between these modes. The sections that follow describe the details.

Submit Documentation Feedback

Product Folder Links: bq28z560-R1

BQ28Z560-R1 Scheda tecnica(PDF) 43 Page - Texas Instruments