ST1CC40DR datasheet(11/37 Pages) STMICROELECTRONICS

Il numero della parte	ST1CC40DR

Spiegazioni elettronici	3 A monolithic step-down current source with synchronous rectification

PDF	37 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

11 / 37 page

DocID18279 Rev 5

11/37

ST1CC40

Functional description

The error amplifier output is compared with the inductor current sense information to

perform PWM control.

5.5

Inhibit

The inhibit block disables most of the circuitry when the INH input signal is low. The current

drawn from the input voltage is 6 µA typical in inhibit mode.

5.6

Thermal shutdown

The shutdown block generates a signal that disables the power stage if the temperature of

the chip goes higher than a fixed internal threshold (150 ± 10 °C typical). The sensing

element of the chip is close to the PDMOS area, ensuring fast and accurate temperature

detection. A 15 °C typical hysteresis prevents the device from turning ON and OFF

continuously during the protection operation.

Table 5. Uncompensated error amplifier characteristics

Description

Value

Transconductance

250 µS

Low frequency gain

96 dB

195 pF

70 K



ST1CC40DR Scheda tecnica(PDF) 11 Page - STMicroelectronics