I–28

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ck-components.com

I

S Series

Slide Switches

Models Available

Features/Benefits

Typical Applications

Specifications

CONTACT RATING: Q contact material (S1XX, S2XX Models):

6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @

125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @

125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).

(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @

250 V AC (UL/CSA). See page J-31 for additional ratings.

ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.

CONTACT RESISTANCE: Below 10 m

Ω typ. initial

@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109

Ω min.

DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.

OPERATING TEMPERATURE: -30ºC to +65ºC

STORAGE TEMPERATURE: -30ºC to +85ºC

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages I–29 through I–32. For additional options not shown in catalog, consult Customer Service Center.

Materials

HOUSING: 6/6 nylon (UL94V-2), black.

TOP PLATE: 6/6 nylon (UL94V-2), black.

ACTUATOR: 6/6 nylon (UL94V-2), black (standard).

CONTACTS: Q contact material: Copper, silver plated. See page

I-31 for additional contact materials.

TERMINALS: Q contact material: Copper, silver plated. See page

I-31 for additional contact materials.

CONTACT SPRING: Music wire or stainless steel.

TERMINAL SEAL: Epoxy.

NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Switch Function

Mounting Style

Detent

Actuator

(with marking)

(without marking)

Contact Material

Seal

Housing Markings

Terminations