175286-2 datasheet(21/236 Pages) ETC2

21 / 236 page

Verbindlich für Toleranzen der Abmessungen und technische Werte sind ausschließlich die neuesten TE Connectivity Kundenzeichnungen bzw. Produkt-Spezifikationen, die Sie auf Anfrage erhalten.

All specifications subject to change. Consult TE Connectivity for latest design specifications.

HTS Industrie Steckverbinder

HTS Heavy Duty Connectors

For safety reasons, electrical equipment needs to be protected against outside influences. The basis for the determination is the stan-

dard IEC 529 titled ‘Degree of protection provided by enclosures (IP – Code)'.

Using a standardized test procedure the extent of the protection class is verified. To classify different housings according to their protec-

tion class, a designation system is used which consists of the code – letters 'IP' and two code numbers.

Arrangement of the IP – Code (International bzw. Ingress Protection)

Code Letter

1st characteristic numeral

2nd characteristic numeral

Meaning of the 1st characteristic numeral

The first numeral describes the protection of the housing against intrusion of foreign bodies as well as the protection of people against

dangerous parts or influences. Because of this, there are two descriptions and definitions for each of the first code letter.

Degree of protection provided by enclosures

1st

numeral

Protection against solid obects and against access to hazardous parts

short description

definition

no protection

-protection against solid foreign bodies of Ø 50mm

-protection against access to hazardous parts with

the back of a hand

-protection against solid foreign bodies of Ø 12 mm

-protection against access to hazardous parts with

the finger

-protection against solid foreign bodies of 2,5 mm

diameter and bigger

-protection against access to hazardous parts with a

tool

-protection against solid foreign bodies of 1,0 mm

diameter and bigger

-protection against access to hazardous parts

with a wire

protected against dust

dust proof

A sphere of Ø 50mm, must not intrude

A sphere of Ø 12mm diameter, must not intrude

A sphere of Ø 2,5mm diameter, must not intrude

The probe, sphere of Ø 1,0mm, must not intrude

The infiltration of dust is not completely prevented, but it

does not infiltrate to such an extent that the operation or

the safety of the device is affected.

No infiltration of dust

175286-2 Scheda tecnica(PDF) 21 Page - List of Unclassifed Manufacturers

175286-2 Scheda tecnica(HTML) 21 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL