PC817X Series

1. Recognized by UL1577 (Double protection isolation),

file No. E64380 (as model No. PC817)

2. Package resin : UL flammability grade

(94V-0)

■ Features

■ Agency approvals/Compliance

1. I/O isolation for MCUs (Micro Controller Units)

2. Noise suppression in switching circuits

3. Signal transmission between circuits of different po-

tentials and impedances

■ Applications

DIP 4pin General Purpose

Photocoupler

1. 4pin DIP package

2. Double transfer mold package (Ideal for Flow Solder-

ing)

5. Several CTR ranks available

6. High isolation voltage between input and output

From the production Date code "J5" (May 1997) to "P7" (July

≥70V.

(model No. PC847X Series)

■ Description

PC817X Series contains an IRED optically coupled

to a phototransistor.

It is packaged in a 4pin DIP, available in wide-lead

spacing option and SMT gullwing lead-form option.

Input-output isolation voltage(rms) is 5.0kV.

to 600% at input current of 5mA.

1

Sheet No.: D2-A03101EN

Date Sep. 30. 2003

© SHARP Corporation

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

PC817X Series