Crimptooling

99

Extraction tooling

RX2025GE1

A spring loaded extraction tool for the full range of TRIM TRIO

contacts. This tool ensures that the contact locking louvres are fully

retracted before any pressure is applied to extract a contact.

RX2025GE2

A low cost spring loaded extraction tool for the full range of TRIM

TRIO contacts.

RX16D11D1

A spring loaded extraction tool for the full range of TRIM TRIO

contacts. This tool ensures that the contact locking louvres are fully

retracted before any pressure is applied to extract a contact. It is

especially suitable for applications where the integrity of the

assemblies are of the utmost importance.

How to extract a contact out of its cavity?

Slide the extraction tip over contact from mating side till the locking

spring from the contact is depressed.

Push on handle to push out the contact with the spring loaded inner

plunger.

Insertion tooling

RTM205

This tool is especially designed to ease insertion of any TRIM TRIO

contact crimped on very flexible or small wire sizes. Simply position

the insertion tool so that the tip of the tool bears against the back of

the wire barrel, retaining the wire with thumb in the groove of the

tool. Push the contact slowly into the connector until it snaps into

position.