Page 4

Document number: 1003996.14

maxwell.com

DATASHEET

PC SERIES ULTRACAPACITORS

NOTES

1. Capacitance and ESR

test current per waveform below.

2. ∆T=I

RMS

2

x ESR x R

th

3. Absolute maximum voltage, non-repeated. Not to exceed 1

second.

4. After 72 hours (208 hours - BCAP3400) at rated voltage.

Initial leakage current can be higher.

5. Per IEC 62391-2, P

6. P

7. E

ESR

4 x ESR

3,600 x mass

8. E

9. Cycle using specified test current per waveform below.

10. Cycle life varies depending upon application-specific

characteristics. Actual results will vary.

11. Per United Nations material classification UN3499, all

Maxwell ultracapacitors have less than 10 Wh capacity

to meet the requirements of Special Provisions 361. Both

individual ultracapacitors and modules composed of those

ultracapacitors shipped by Maxwell can be transported

without being treated as dangerous goods (hazardous

materials) under transportation regulations.

3,600

MOUNTING RECOMMENDATIONS

Do not reverse polarity. Please refer to document

number 1008238, available at maxwell.com for soldering

recommendations.

MARKINGS

Products are marked with the following information:

Rated capacitance, rated voltage, product number, name of

manufacturer, and positive terminal.