Feature

* Plastic package has Underwriters Laboratory

Flammability Classification 94V-O

* Glass passivated chip junction in DO-15 package

* 500W surge capability at 1ms

* Excellent clamping capability

* Low zener impedance

* Fast response time: typically less

than 1.0 ps from 0 volts to BV min

* Typical IR less than 1

μA above 10V

* High temperature soldering guaranteed:

260 /10 seconds/.375

”,(9.5mm) lead

length/5lbs., (2.3kg) tension

Case: JEDEC DO-15 molded plastic

We declare that the material of product compliance

Terminals: Axial leads, solderable per

with ROHS requirements

MIL-STD-202, Method 208

Polarity: Color band denoted cathode

except Bipolar

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types SA5.0A thru types SA170A

Electrical characteristics apply in both directions.marking code is all type.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

SYMBOL

VALUE

UNITS

Minimum 500

Watts

3.0

Watts

70

Amps

-55 to +150

°C

-55 to +175

°C

NOTES:

1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25

°C per Fig. 2.

2. Mounted on Copper Leaf area of 1.57in2(40mm2).

3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.

Lead Lengths .375

”,(9.5mm) (Note 2)

Peak Forward Surge Current, 8.3ms Single Half Sine-

Wave Superimposed on Rated Load(JECED Method) (Note 3)

Operating Temperature Range

Storage Temperature Range

SA***

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 5.0 TO 170 Volts

500Watt Peak Power

3.0 Watt Steady State

RATING

Mechanical Data

Electrical Characteristic