Top-emitting 0805 (2013)

HT-170 Series

Official Product

Product: HT-170 Series

Data Sheet No.

Tentative Product

****************

HT-170 Series

Specifications are subject to change without notice. Data and

drawings herein are copyrighted.

MAR. 27, 2012

Version of 1.2

Page

12/23

Precaution for Use

1. The chips should not be used directly in any type of fluid such as water, oil, organic

solvent, etc.

2.

When the LEDs are illuminating, the maximum ambient temperature should be first

considered before operation.

3. LEDs must be stored in a clean environment. A sealed container with a nitrogen

atmosphere is necessary if the storage period is over 3 months after shipping.

4. The LEDs must be used within seven days after unpacked. Unused products must

be

repacked in an anti-electrostatic package, folded to close any opening and then

stored in

a dry and cool space.

5. The appearance and specifications of the products may be modified for

improvement

without further notice.

6. The LEDs are sensitive to the static electricity and surge. It is strongly

recommended to

use a grounded wrist band and anti-electrostatic glove when handling the LEDs.

If a voltage over the absolute maximum rating is applied to LEDs, it will damage

LEDs.

Damaged LEDs will show some abnormal characteristics such as remarkable

increase

of leak current, lower turn-on voltage and getting unlit at low current.