Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties that

may result from its use. No license is granted by implication or otherwise

under any patent or patent rights of Analog Devices.

a

ADG784

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

www.analog.com

Fax:

© Analog Devices, Inc.,

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1

Mux in Chip Scale Package

FUNCTIONAL BLOCK DIAGRAM

ADG784

S1A

S1B

D1

S2A

S2B

S3B

S3A

S4A

S4B

D2

D3

D4

IN

EN

1-OF-2

DECODER

FEATURES

Low Insertion Loss and On Resistance: 4

Typical

On-Resistance Flatness <2

Bandwidth >200 MHz

Single 3 V/5 V Supply Operation

Rail-to-Rail Operation

Very Low Distortion: <1%

Low Quiescent Supply Current (100 nA Typical)

Fast Switching Times

TTL/CMOS Compatible

For Functionally Equivalent Devices in 16-Lead QSOP/

SOIC Packages, See ADG774

APPLICATIONS

100VG-AnyLAN

Token Ring 4 Mbps/16 Mbps

ATM25/155

NIC Adapter and Hubs

Audio and Video Switching

Relay Replacement

GENERAL DESCRIPTION

The ADG784 is a monolithic CMOS device comprising four

2:1 multiplexer/demultiplexers with high impedance outputs.

The CMOS process provides low power dissipation yet gives

high switching speed and low on resistance. The on-resistance

variation is typically less than 0.5

Ω with an input signal ranging

from 0 V to 5 V.

The bandwidth of the ADG784 is greater than 200 MHz and

this, coupled with low distortion (typically 0.5%), makes the

part suitable for switching fast ethernet signals.

The on-resistance profile is very flat over the full analog input

range ensuring excellent linearity and low distortion when switch-

ing audio signals. Fast switching speed, coupled with high signal

bandwidth, also makes the parts suitable for video signal switch-

ing. CMOS construction ensures ultralow power dissipation

making the parts ideally suited for portable and battery powered

instruments.

The ADG784 operates from a single 3.3 V/5 V supply and is

TTL logic compatible. The control logic for each switch is shown

in the Truth Table.

These switches conduct equally well in both directions when

ON, and have an input signal range that extends to the sup-

plies. In the OFF condition, signal levels up to the supplies

are blocked. The ADG784 switches exhibit break-before-

make switching action.

PRODUCT HIGHLIGHTS

1. Also Available as ADG774 in 16-Lead QSOP and SOIC.

2. Wide Bandwidth Data Rates >200 MHz.

3. Ultralow Power Dissipation.

4. Extended Signal Range.

The ADG784 is fabricated on a CMOS process giving an

increased signal range that fully extends to the supply rails.

5. Low Leakage over Temperature.

6. Break-Before-Make Switching.

This prevents channel shorting when the switches are config-

ured as a multiplexer.

7. Crosstalk is typically –70 dB @ 30 MHz.

8. Off isolation is typically –60 dB @ 10 MHz.

9. Available in Chip Scale Package (CSP).

REV. A

2013

781/461-3113