AN2353 datasheet(10/18 Pages) STMICROELECTRONICS

Il numero della parte	AN2353

Spiegazioni elettronici	Designing an application with the ST10F27x devices

PDF	18 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

10 / 18 page

Filtering / decoupling

AN2353

10/18

Filtering / decoupling

3.1

Decoupling on V18 pins

V18 is the output of the ST10F27x internal voltage regulator. It is available on the package to

connect external decoupling capacitors.

A capacitor, X7R dielectric or equivalent, with a minimum value of 10nF (and maximum

100nF) must be connected between this pin and its nearest VSS pin. This is done to

decouple the output of the internal regulator from the ground.

3.2

Decoupling on +5V supply

Decoupling capacitors are placed as close as possible to the chip VSS/VDD pins:

●

Connected to both VDD and VSS pins (adjacent pins)

●

Connected to each VDD/VSS pair

For EMC reasons, decoupling capacitors are connected to the VDD and VSS of adjacent

pins. This is illustrated by

Figure 4 below:

Figure 4.

Implementation of decoupling capacitors

ST10F27x

VSS

Via to VDD

Via to VSS

Good implementation

ST10F27x

Implementation to be avoided

Cap.

Via to VSS

Cap.

VDD

VSS

VDD

AN2353 Scheda tecnica(PDF) 10 Page - STMicroelectronics