3/6

STR71xF Embedded Flash Programming with ADS

3

Start the Multi-ICE server and select

identifies the target. Once the target is identified, the window will be similar to that shown in

Figure 1.

Note:

If Multi-ICE server cannot identify the target you will have to do a manual configuration. Refer to the

ARM Multi-ICE User Guide.

2.3

Using the Flash downloader from AXD

Once you have connected to the target you can launch AXD and run the Flash Downloader utility. From the

AXD interface, you can now invoke the Flash downloader utility and download your binary file to the target.

To do so:

1

Copy the furnished flash.li file for STR71xF devices to the directory

Install_directory\ADS\bin

2Start AXD.

3

In AXD select

Figure 2)

Figure 1: Multi-ICE server connected to target board

Figure 2: Flash DownLoad dialog box