RM0312 datasheet(49/275 Pages) STMICROELECTRONICS

Il numero della parte	RM0312

Spiegazioni elettronici	STM8TL5xxx microcontroller family

PDF	275 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

49 / 275 page

DocID022352 Rev 3

49/275

RM0312

Interrupt controller (ITC)

5.9

ITC and EXTI registers

5.9.1

CPU condition code register interrupt bits (CCR)

Address: refer to the general hardware register map table in the datasheet.

Reset value: 0x28

654

3210

V–

Bits 5, 3(1) I[1:0]: Software interrupt priority bits(2)

These two bits indicate the software priority of the current interrupt request. When an interrupt

request occurs, the software priority of the corresponding vector is loaded automatically from the

software priority registers (ITC_SPRx).

The I[1:0] bits can be also set/cleared by software using the RIM, SIM, HALT, WFI, IRET or

PUSH/POP instructions (see Figure 9: Nested interrupt management).

Priority

Level

Level 0 (main)

Low

High

Level 1

Level 2

Level 3 (= software priority disabled*)

1. Refer to the central processing section for details on the other CCR bits.

2. TRAP and RESET events can interrupt a level-3 program.

RM0312 Scheda tecnica(PDF) 49 Page - STMicroelectronics