93C66B datasheet(6/12 Pages) MICROCHIP

6 / 12 page

93C66A/B

DS21207B-page 6

Preliminary

3.6

ERASE/WRITE Disable and Enable

(EWDS/EWEN)

The device powers up in the ERASE/WRITE Disable

(EWDS) state. All programming modes must be pre-

ceded by an ERASE/WRITE Enable (EWEN) instruc-

tion. Once

the

EWEN

instruction

executed,

programming remains enabled until an EWDS instruc-

tion is executed or VCC is removed from the device. To

protect against accidental data disturbance, the EWDS

instruction can be used to disable all ERASE/WRITE

functions and should follow all programming opera-

tions. Execution of a READ instruction is independent

of both the EWEN and EWDS instructions.

3.7

READ

The READ instruction outputs the serial data of the

addressed memory location on the DO pin. A dummy

zero bit precedes the 8-bit (93C66A) or 16-bit

(93C66B) output string. The output data bits will toggle

on the rising edge of the CLK and are stable after the

speciﬁed time delay (TPD). Sequential read is possible

when CS is held high. The memory data will automati-

cally cycle to the next register and output sequentially.

FIGURE 3-4:

EWDS TIMING

FIGURE 3-5:

EWEN TIMING

FIGURE 3-6:

READ TIMING

CLK

•••

TCSL

CLK

TCSL

•••

CLK

•••

HIGH-Z

0Dx

•••

93C66B Scheda tecnica(PDF) 6 Page - Microchip Technology

93C66B Scheda tecnica(HTML) 6 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Scheda tecnica Scarica

Link URL