2

TECHNICAL DATA SHEET

#

Notes

1

Keep provided protective blue caps installed when not in use.

2

Store in climate controlled environment.

3

Always keep connectors clean.

4

Avoid touching the connector interface.

5

Use caution when handling.

6

For female components, do not insert male pin greater than 0.037" [.94 mm]. Failure to

comply will result in damage to the female connector.

7

When mating, always ensure that the components to be interconnected remain in a fixed

position while rotating only the coupling nut slowly to mate the connectors.

8

When de-mating, always ensure that the interconnected components remain in a fixed

position while rotating only the coupling nut slowly to de-mate the connectors.

9

Visually inspect the connector threads prior to use. If needed, clean the center conductor

pin and outer conductor with alcohol to remove any debris that may be present. Be sure to

apply the alcohol in a circular motion with a lint-free cloth or applicator.

10 Use at room temperature.

11 Torque wrench provided is intended for 3.5mm connector types and is calibrated to 8 in-lbs.

General Instructions and Usage Notes

PE5SC2000

PE5SC2000 REV 1.0

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: 3.5mm Female General Purpose Calibration Kit Component Open Circuit Operating From DC

to 26.5 GHz PE5SC2000

3.5mm Female General Purpose Calibration Kit Component

Open Circuit Operating From DC to 26.5 GHz