Page 26

ams Datasheet

Document Feedback

[v1-09] 2016-Jan-11

TCS3490 − Pack age Mechanical Data

Figure 36:

Carrier Tape & Reel Information

Note(s) and/or Footnote(s):

1. All linear dimensions are in millimeters. Dimension tolerance is ± 0.10 mm unless otherwise noted.

2. The dimensions on this drawing are for illustrative purposes only. Dimensions of an actual carrier may vary slightly.

3. Symbols on drawing Ao, Bo, and Ko are defined in ANSI EIA Standard 481−B 2001.

4. Each reel is 330 millimeters in diameter and contains 2500 parts.

5. Packaging tape and reel conform to the requirements of EIA Standard 481−B.

6. In accordance with EIA standard, device pin 1 is located next to the sprocket holes in the tape.

7. This drawing is subject to change without notice.

8. The device pin 1 is located in the upper left corner inside the T&R pockets.

Package Mechanical Data